Exterior and interior, as a pre-coat and finishing enamel on pre-treated metal.
Ralston Industrial Satin
Scratch-resistant, satin gloss, anticorrosive pre-coat and finishing enamel based on urethane/alkyd resin.
- Scratch and abrasion resistant
- Anti-corrosive
- Good outdoor durability
Application
Location
Exterior, Interior
Colours
All colours available via the Ralston ALK colour mixing system.
Packaging
1 l, 2.5 l
Gloss level
Satin gloss
Drying time
20 °C / 65 % R.V.: Dust-free after approx. 2.5 hr, tack-free approx. 3.5 hr, recoatable approx. 16 hr.
Explanatory sentence on drying times
Drying times are average values and provided as an indication only, actual drying time will depend on weather conditions, film thickness and choice of colour. Darker colours, applied in lower temperatures will take longer to dry than whites and lighter colours.
Binding agent
Urethane alkyd resin
Application
brush, roller, air spray, air-assisted airless
Coating thickness
35 microns dry film thickness = approx. 76 microns wet film thickness
Theoretical return
13.2 m2/l
Processing temperature / R.V.
Min. 5 ambient and substrate temp., relative humidity max. 85%. Substrate temperature min. 3°C above dew point.
Downloads
Related products
![Ralston ExtraTex Clean [2]](https://www.ralstoncolour.com/wp-content/uploads/40046_Ralston_ExtraTex_Clean__2__BIOseries_W_BW_10L_front_V24_EN-267-140x125.png)
