Scratch-resistant, high-gloss, anticorrosive pre-coat and finishing enamel based on urethane/alkyd resin.
Ralston Industrial High-Gloss
Scratch-resistant, high-gloss, anticorrosive pre-coat and finishing enamel based on urethane/alkyd resin.
- Scratch and abrasion resistant
- Anti-corrosive
- Good outdoor durability
Application
Location
Exterior, Interior
Colours
All colours available via the Ralston ALK colour mixing system.
Packaging
1 l, 2.5 l
Gloss level
High gloss
Drying time
20 °C / 65 % R.V.: Dust-free after approx. 2.5 hr, tack-free approx. 3.5 hr, recoatable approx. 16 hr.
Explanatory sentence on drying times
Drying times are average values and provided as an indication only, actual drying time will depend on weather conditions, film thickness and choice of colour. Darker colours, applied in lower temperatures will take longer to dry than whites and lighter colours.
Binding agent
Urethane alkyd resin
Application
brush, roller, air spray, air-assisted airless
Coating thickness
35 microns dry film thickness = approx. 78 microns wet film thickness
Theoretical return
12.9 m2/l
Processing temperature / R.V.
Min. 5 ambient and substrate temp., relative humidity max. 85%.
Downloads
Red Label - Industrial_EN_LEAFLET_72dpi.pdf - Leaflet informationTechnical datasheet en 40001 Ralston Industrial High-Gloss 1.5 - Product informationSDS_400010000_Ralston_Industrial_High-Gloss_BW_1_00_EU_EN.pdf - Safety informationSDS_400010010_Ralston_Industrial_HighGloss_BTR_1_00_EU_EN.pdf - Safety information
Related products
![Ralston Zora Matt [2]](https://www.ralstoncolour.com/wp-content/uploads/8712952273150_Ralston_Zora_Matt_2_WBW_10L_front_V1_EN-21-140x125.png)