Ralston Wall Primer BIOseries

Good penetrating colourless sealer for interior and exterior use.
  • Reduces absorption of the substrate
  • Improves adhesion
  • Water vapour permeable

Application

As a ECO-label primer sealer on absorbing and porous stony surfaces such as concrete, masonry, plasterwork and stony sheet work etc., for interior and exterior use. As undercoat for acrylate dispersion wall paints. Can also be mixed with Ralston acrylate dispersion wall paints. When processing all our products, the processing tips below apply: Waste as little paint as possible by estimating in advance how much paint you will need. Seal unused paint tightly and store it in a cool, dry, frost-free place so it can be reused later. Waste management; Do not pour leftover paint into the sink or toilet and do not throw it in a dustbin. Unused paint can be deposited at the nearest municipal depot or an environmental square (KCA point). The reuse of paint can significantly reduce the environmental impact of the products during their life cycle. Wear protective gloves, clothing, eye and face protection during processing. Before and after opening, store paint safely in a sealed original container in a cool (5–35⁰C), dry, and frost-free place.

Location

Exterior, Interior

Colours

Clear

Gloss level

Matt

Drying time

20 °C / 65 % R.V.: Dust-free after approx.1 hr, recoatable after approx. 4 hr.

Explanatory sentence on drying times

The stated drying times are typical and depend on such factors as temperature and humidity.

Binding agent

Acrylate polymer (biobased)

Application

brush, roller

Theoretical return

3 - 5 m2/l

Processing temperature / R.V.

Min. 10 ambient and substrate temp., relative humidity max. 85%.

Related products

Find a shop near you

How many litres of paint do I need?

Newsletter

Sign up for our newsletter